- Overview
- Product Description
- Detailed Photos
- Machine structure
- Products characteristics
- Product Parameters
- Certifications
- Company Profile
- After Sales Service
Basic Info.
Model NO.
BL-DC
Burner Brand
Comtherm
Transport Package
Container by Sea Transport
Specification
Direct blaster heater
Trademark
HEXIANG
Origin
China
HS Code
84193910
Production Capacity
30sets/One Year
Product Description
Direct-fired gas hot blast heater is a special industrial furnace that uses gas (liquefied petroleum gas, natural gas and city coal gas) as fuel, air as a carrier, and transfers heat energy to heating equipment through centrifugal fans.
It is especially suitable for the drying of large-scale green bodies in the ceramic industry and has been adopted by many ceramic industry manufacturers.
The direct blaster heater includes the following parts:
Combustion engine: equipped with Britain COMTHERM combustion engine with big fire & small fire output
Furnace chamber: Including furnace cavity, air inlet, air outlet
Centrifugal blower (exhaust fan)
Electric control system
Checking platform
Combustion engine: equipped with Britain COMTHERM combustion engine with big fire & small fire output
Furnace chamber: Including furnace cavity, air inlet, air outlet
Centrifugal blower (exhaust fan)
Electric control system
Checking platform
1)High efficiency
Using high-efficiency burner, high thermal efficiency, structurally, the thermal efficiency is better than the indirect hot blast stove, and the thermal efficiency is close to 100%2)Energy conservation
A heat-resistant glass observation window is installed on the burner shell to facilitate the operator to observe the flame status, integrated design, simple installation and convenient operation
3)Easy to maintain
All parts of the burner, including the combustion head, can be individually disassembled and replaced without disassembling the whole machine. The combustion head, ignition electrode and flame detection electrode can be adjusted and disassembled and replaced at the panel of the burner enclosure.
4) Slight smoke pollution
Due to insufficient combustion of the burner, the emitted hot air will contain slight smoke and dust, but the use of a high-efficiency burner can greatly alleviate this shortcoming.
| Technical parameters | Unit | Data | Remark |
| Temperature | ºC | Normal temperature-45ºC | |
| Drying cycle | Hour | 8-18 | |
| Work ambient | ºC | Temperature ≤50ºC | |
| Relative humidity | % | R.H≤85% | |
| Burner type | Britain COMTHERM |
