1200kw Horizontal Gas Oil Fired Thermal Fluid Hot Oil Boiler Heater

Oil Gas Fired Thermal Oil Boiler

YY(Q)W series oil fired thermal oil boiler is an safe and energy saving boiler with working characteristics of low working pressure (0.8 MPa) and high temperature (330ºC).The heat carrier is heat conduction oil, the circulating pump force heat transfer medium circulating in liquid phrase, and transfer heat to heat user equipment, then return to the heating furnace for reheating. Jinzhen Boiler has a mature R&D and design team, could customize the boilers based on customers' requirement. 
Working Principle Of Thermic Fluid Heater
This thermic fluid boiler has compact structure. The heating area is constituted by close-knit coil pipes from inside to outside.Inside coil pipes are the radiation heating surface, and the outer surface of inside coil pipes and outside coil pipes form a  convection heating surface.Fuel burn  fully in the combustion chamber, the  radiation heating surface absorb most heat, and then high temperature flue gas goes into convection heating surface to exchange heat, then go into the air preheater (or waste heat boiler) to heat the required (or water).at last, the low temperature flue gas discharges to the aerosphere through the chimney.
Thermal Oil Boiler Layout
This thermic fluid heater has advanced program control system, equipped with liquid level controller , pressure controller, temperature controller, and alarms to make sure the boiler work orderly and safe. So it is a kind of safe boiler with high efficiency and low power consumption.

Its advantage is Free-Installation

The complete boiler system is well skid-mounted on the basement, also we have done the pipe(valves) connection and wire connection. After receiving the boiler, user no need to do installation, just filling the thermal fluid oil, join the fuel and electricity. Entire boiler system is portable.

1. High thermal efficiency

The thermal oil boiler is circulation heating in liquid phase, there is no heat loss leaded by condensing, thermal efficiency is high, and the boiler is very safe when operating.

2) The boiler shell use aluminum silicate board for heat preservation, low heat loss.

3) By equipped with economizer, make full use of flue gas heat, decrease the exhaust smoke temperature.

2. Large combustion chamber

The boiler combustion chamber is composed with large diameter coil, enough fuel combustion space, sufficient combustion, high thermal efficiency. Moreover, the boiler adopts positive pressure combustion, improve the combustion efficiency.

3. Excellent coil design

The spiral pipes are made of small diameter multi-head steel tubes, good thermal expansibility, low stress, safe and reliable.

4. Sufficient output

Thermic fluid heater adopts horizontal type three pass structure, improve the heat utilization efficiency. Large heating area, good heat transfer, achieve high thermal efficiency and sufficient output.

5. Multi-function safety explosion-proof equipment

Equipped with explosion proof equipment at the back of boiler, prevent deflagration in furnace, discharge high energy, to ensure the hot oil boiler operate safely and efficiently.

Three Coil Pipes

Bigger heating surface to improve boiler efficiency and the third pipes protect front smoke box and whole boiler shell from Burnt deformation.

Circulating Oil Pump

The system adopts high-quality circulating oil pump, with good high temperature and corrosion resistance, low power consumption, low failure rate, long-term stable operation and no leakage .

Oil Tank

Replenish oil in time and maintain the normal circulation of the medium in the system. Special steel plate thickened production, safe and durable, reliable quality.

Application Industry Of Thermic Fluid Heater

Petrochemical industry: polymerization, melting, condensation, distillation, de-H2, forced insulation.

Oil industry: fatty acid distillation, oil decomposition, concentration, esterification, vacuum deodorization.

Textile printing and dyeing industry: heat setting, hot melt dyeing, baking, calendering, drying, hot air stentering.

Plastic and rubber industry: hot pressing, hot rolling, extrusion, vulcanization, calendering, injection molding machine, glue mixer, conveyor belt dryer.

Papermaking industry: drying, corrugated paper processing, calendering, rubberized rollers.

Wood industry: Thermal oil heater to make plywood, MDF hot pressing, wood drying, steaming equipment.

Building materials industry: gypsum board drying, asphalt heating, asphalt concrete, emulsified asphalt, concrete component maintenance, drying equipment, linoleum production lines.

Detergent industry: cooking pots, autoclaves, conveyor dryers, lipolysis equipment, distillation towers.

Fat and paint industry: autoclave, dryer, retort, cooking equipment.

Automobile industry: tunnel drying room, degreasing bath, phosphate treatment equipment.

Carbon industry: graphite electrodes, carbon products, asphalt melting, kneading pot heating, extrusion molding.

Electrical equipment industry: calender, platen press, vacuum pot, dryer.

Coking industry: gas storage tank, mixing station, distribution station.

Metal and foundry industry: degreasing tank, phosphate processing equipment, baking machine (room), sand core drying.

1.What are the heat-resistance temperature of grate and furnace?