- Overview
- Product Description
- Product Parameters
- Technical Advantage
- Detailed Photos
- Application
- FAQ
Basic Info.
Product Description
Oil Gas Fired Thermal Oil Boiler
Heat Power:300,000-2,000,000 Kcal/HWorking Pressure :0.8 Mpa
Fuel :diesel, heavy oil, light oil, crude oil
Application : textile printing and dyeing, plastic and rubber, paper industry, wood industry, building material, food industry, etc.
thermal oil heater is a kind of special industrial furnace which uses diesel oil as the fuel, the furnace takes heat carrier oil as medium and uses the hot oil circulating pump force the medium to make liquid circulation; then the thermal energy will be transmitted to the devices and back to the furnace to be reheated.
This thermal oil boiler have advanced program control system, equipped with liquid level controller , pressure controller, temperature controller, and alarms to make sure the boiler work orderly and safe. So it is a kind of safe boiler with high efficiency and low power consumption.
Working Principle Of Thermic Fluid Heater
This thermic fluid boiler has compact structure. The heating area is constituted by close-knit coil pipes from inside to outside.Inside coil pipes are the radiation heating surface, and the outer surface of inside coil pipes and outside coil pipes form a convection heating surface.Fuel burn fully in the combustion chamber, the radiation heating surface absorb most heat, and then high temperature flue gas goes into convection heating surface to exchange heat, then go into the air preheater (or waste heat boiler) to heat the required (or water).at last, the low temperature flue gas discharges to the aerosphere through the chimney.
Thermal Oil Boiler Layout
This thermic fluid heater has advanced program control system, equipped with liquid level controller , pressure controller, temperature controller, and alarms to make sure the boiler work orderly and safe. So it is a kind of safe boiler with high efficiency and low power consumption.
Its advantage is Free-Installation
The complete boiler system is well skid-mounted on the basement, also we have done the pipe(valves) connection and wire connection. After receiving the boiler, user no need to do installation, just filling the thermal fluid oil, join the fuel and electricity. Entire boiler system is portable.
Model | YYW-120YC | YYW-230YC | YYW-350YC | YYW-470YC | YYW-700YC | YYW-930YC | YYW-1200YC |
| |||||||
Item | |||||||
Rated power(KW) | 120 | 230 | 350 | 470 | 700 | 930 | 1200 |
Design | 0.9 | ||||||
pressure(Mpa) | |||||||
Rated working | 0.6 | ||||||
pressure(Mpa) | |||||||
Highest working | 320 | 320 | 320 | 320 | 320 | 320 | 320 |
temperature(C) | |||||||
Furnace oil | 0.1 | 0.2 | 0.28 | 0.38 | 0.55 | 0.75 | 1 |
volume(m3/h) | |||||||
Circulation oil | 12.5 | 32 | 40 | 60 | 80 | 100 | 100 |
volume(m3/h) | |||||||
Pipe connection diameter(DN) | 50 | 65 | 80 | 80 | 100 | 125 | 125 |
Thermal Efficiency | 75 | 80 | 85 | 85 | 85 | 85 | 85 |
(%) | |||||||
Size (m) | 1.5x1.1x1.4 | 2.0x1.2x1.5 | 2.5x1.3x1.6 | 2.7x1.6x1.9 | 3.1x1.6x1.9 | 3.8x1.7x2.0 | 3.8x1.8x2.1 |
Weight (t) | 2 | 2.9 | 3.7 | 4.5 | 4.9 | 5.5 | 6.5 |
1. High thermal efficiency
The thermal oil boiler is circulation heating in liquid phase, there is no heat loss leaded by condensing, thermal efficiency is high, and the boiler is very safe when operating.
2) The boiler shell use aluminum silicate board for heat preservation, low heat loss.
3) By equipped with economizer, make full use of flue gas heat, decrease the exhaust smoke temperature.
2. Large combustion chamber
The boiler combustion chamber is composed with large diameter coil, enough fuel combustion space, sufficient combustion, high thermal efficiency. Moreover, the boiler adopts positive pressure combustion, improve the combustion efficiency.
3. Excellent coil design
The spiral pipes are made of small diameter multi-head steel tubes, good thermal expansibility, low stress, safe and reliable.
4. Sufficient output
Thermic fluid heater adopts horizontal type three pass structure, improve the heat utilization efficiency. Large heating area, good heat transfer, achieve high thermal efficiency and sufficient output.
5. Multi-function safety explosion-proof equipment
Equipped with explosion proof equipment at the back of boiler, prevent deflagration in furnace, discharge high energy, to ensure the hot oil boiler operate safely and efficiently.
Owing to its characteristics of high heating temperature, low working pressure, and energy saving, the oil fired thermal fluid heater could be widely used in a variety of industrial heating process.
1) Textile industry - dyeing machine, drying rooms, high temperature machine, resin setting machine.
2) Food industry - cooking, drying, vegetable oil refining.
3) Chemical industry - oil chemistry, polymer industry, reaction tanks, distillation, concentration.
4) Plastics industry - plastics fired, extruded shape.
5) Rubber industry - hot press, hot extent, extrusion, vulcanization molding, injection, etc.
6) Paper industry - drying, corrugated paper processing, calender, glue roller.
7) Wood industry - hot processing, heat setting.
8) Machinery industry - drying, assembly processing
9) Building materials industry - plasterboard drying, asphalt heating, emulsified asphalt, asphalt concrete, concrete component maintenance, etc.
10)Synthetic fiber industry: polymerization, melting, spinning, extension, dry 
1.What are the heat-resistance temperature of grate and furnace?
The heat resistance temperature of grate is related to the grate material, the highest temperature could be as high as 1100ºC, and the lower temperature could be 700ºC.The highest heat resistance temperature of furnace could be about 1700ºC~1800ºC.
2.What is conduction oil/ hot oil / heat transfer fluid?
Conduction oil has a high boiling point, it usually used for the industries that need the temperature of 150~350ºC, to instead of steam. The hot oil has the advantages of high transfer efficiency, fast heat transfer, and good thermal stability.
3.What about the delivery?
We have shipping agent can choosing the cheapest and fastest delivery. FOB,CIF, C&F or EXW are no problem for us.
4.What about the maintenance?
I will offer you the timely maintenance way sheet after installation of the boiler mainly parts.